CTL Multi Blanking Line , Hydraulic Sheet Cutting Machine Coil O.D Max 1800 Mm

 

 

Highest Production Outcome Ease of Operation and Maintenance Working procedure: In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil. 

 

Available raw material for cut to length machine is hot rolled steel, cold rolled steel, galvanized steel, pre-painted steel, high tensile steel, stainless steel, aluminum, copper, alloys in cut to length line manufacturers.

 

1. Coil properties: δs≤550MPa, δb≤600MPa

2. Coil thickness: 3mm-12mm

3. Coil width: Max. 2200mm

4. Coil I.D: 508 mm

5. Coil O.D: Max. 1800 mm

6. Coil weight: 30000 kg

7. Line speed: 0-30 m/min

8. Leveler shaft diameter: 180 mm

9. Leveler rollers quantity: 11

10. Cutting length: 800-12000 mm

11. Cutting rate: 12 pieces/min

12. Length tolerance: ±1 mm

13. Diagonal tolerance: ±2 mm

14. Straightening tolerance: ±2 mm/m2

15. Total power: about 200 KW

16. Total weight: about 70 T

 

 

RISHBIN, as one of the cut to length machine manufacturers, medium gauge cut-to-length lines are built for speed and ease of use and can produce higher line speeds without experiencing material slippage. Medium gauge lines are also capable of processing surface critical material without marking. Cut-To-Length Line and Blanking Line will make your job easier, cut costs, and increase your profits.